Price: [price_with_discount]
(as of [price_update_date] – Details)
Product Description
Why choose this product ?
APP or IR remote at Will
APP: More Functions, More Fun.
IR Remote: Always ready to use, standard functions.
Tip:APP can change freq and brightness of dynamic modes on IR remote.
Boost your Party
Optimized ultra low sync delay of Music Control. Boost your Party with Music/Mic Mode. Just put phone where to collect sound beats.
Superior RGB 5050 LED
Super bright, dimmable, 16M colors, 50000 hours lifespan.
True JOY of lighting
TJOY is committed to bringing happiness to customers through colorful and innovative lighting products.
TJOY brings joy and value by colorful and fantastic lighting.
Colorful world for children
Deeper love for couple
More FUN for party
Passion and companionship for the elder.
EASY INSTALLATION
First, connect strip, controller, power adaptor one by one.
Step 1: Insert the 4-pin interface of the strip into the 4-hole socket of the controller. Note that the arrow mark should align the 12V mark. If wrong direction, the strip would not light up.
Step 2: Connect the controller to the power adapter.
Step 3: Plug into power socket to get power supply.
Second, use the IR remote. Pull out the plastic pad before use the IR remote control. Press on/off button to light up. Check power and connection if fail to light up. You can also use Tuya Smart APP to test lights.
After test, you can install the strip to wall or where you want.
If you want to cut the strip to desired length before installing, MUST cut exactly along the scissor mark. Measure from the white controller on. Cut the redundant section off. Use sharp scissors to make a clean cut to avoid damaging circuit.
You can link them again later with 4-pin led strip connector which is NOT included in package. Just search ‘4-pin led strip connector’ or similar words for connector.
Always do test before installation after cut or link operation.
Finally, install the strip to where you want. Upgraded self-adhesive tape makes it very easy to install. Just tear and attach. The surface should be smooth and clean and dry, which would hold strip more stable. Note that it is indoor use only and NOT waterproof.
WARM TIPS
* When connect strip to controller by 4-pin interface, do align arrow mark to 12V mark. lights will not light up with wrong direction.
* When connect two rolls of strip, please connect them in parallel, not in series. Parallel means one roll to each 4-pin socket of controller. One socket can only drive 25ft strip. Overload can cause degraded performance and much shorter lifespan.
* Clean the surface before attaching strip to it. Make sure the surface is smooth&clean&dry to avoid falling off after a period of time.
* The angle of the IR receiver is 120°and the sensing limited is 8 meters,if the application don’t feedback,try control it within the sensing range.
* Don’t forget to pull out the plastic pad before using remote control. You can insert the plastic pad back to the remote after using to extend battery life. Replace a new battery when remote doesn’t work any more.
* If the power adaptor damaged,do not attempt to repair it under any circumstances.Just leave it and send email to our technical support,we’ll deal with it ASAP.
APP and IR remote control : There are 2 ways to control LED strip lights: IR remote and smart app. The 24-key IR remote comes with 12 preset colors and 4 dynamic function keys, SIMPLE to use. The APP has rich functions in 5 modes: Color Wheel/Music/Mic/Style/Timing.
50ft LONG Strip, Excellent Ambience Light : 2 rolls of 25ft led strip lights are long enough to reach around one room and light it up. Cuttable and linkable design allows you to adjust the length of strip as you like(max to 25ft for single strip). You can cut the strip along the cutting mark to get desired length. And later you can link them again by specific 4-pin connector. ( 4-pin led strip connectors are NOT included. You can buy some if need)
Music Sync Lighting : APP sync makes your phone a best sound source to control strip lights with the same beat. Deeply optimized ultra low delay from phone to light. You can put phone anywhere to collect sound.
Set Up in minutes : Very simple installation. Just connect the parts and install to where you want. Upgraded self-adhesive tape makes it easy to stick on clean, dry surface. Just follow instructions on manual and you can finish in minutes. We recommend you test the lights before installation. Note that it’s NOT waterproof and is designed for indoor use only. [Non-Waterproof]
100% Satisfaction Service and warranty : Our professional and warm service team are always ready to provide 100% Satisfaction Service with 24 hours quick response. TJOY provides 1 year standard warranty for the product.
[ad_2]